Brake fluid contamination has become so much of a concern of some major car manufacturers that they have added it to their required maintenance list and recommend it to be flushed every 2 years. Failure to change your vehicle brake fluid can result in very costly repairs. If you have ABS (anti-lock brake system) brakes, component failure can require thousands of dollars worth of repairs!!!

BRAKE FLUID FLUSH INCLUDES:

1. Check brake fluid for moisture and contamination.

2. Inspect all hydraulic lines and hoses.

3. Inspect calipers for leakage.

4. Inspect master cylinder and cap.

5. Clean out dirt and old fluid from master cylinder.

6. Flush old fluid out of master cylinder, calipers and wheel cylinders until clean.

7. Top off master cylinder with new brake fluid.

8. Performance test vehicle for proper brake operation.

 
BRAKE INSPECTION AND SERVICE INCLUDES:

1. Visually inspect hydraulic system for leaks and condition.

2.  Remove all wheels and inspect brake lining, brake hardware and visually inspect wheel
   cylinders and calipers.

3. Visually inspect brake rotors and drums.

4. Lubricate backing plate and adjusting hardware.

5. Remove brake dust.

6. Adjust brakes.

7. Adjust parking brake.

8. Performance test vehicle for proper brake operation.

Don’t delay. Have our technicians perform this service for you today! Feel free to contact us at Buehler Automotive for any questions regarding this service.